1/5/10Pcs TI UCC284DP-5 LDO .5A Negative Voltage Regulator -3.2-15V In/-5V Out

Description

TI UCC284DP-5 LDO .5A Negative Voltage Regulator -3.2-15V In/-5V Out SOIC-8
The UCC384-x family of negative linear-series pass regulators is tailored for low-dropout applications where low-quiescent power is important. Fabricated with a BCDMOS technology ideally suited for low input-to-output differential applications, the UCC384-x passes 0.5 A while requiring only 0.2 V of input-voltage headroom. Dropout voltage decreases linearly with output current, so that dropout at 50 mA is less than 20 mV. Quiescent current consumption for the device under normal (non-dropout) conditions is typically 200 uA. An integrated charge pump is internally enabled only when the device is operating near dropout with low VIN. This ensured that the device meets the dropout specifications even for maximum load current and a VIN of –3.2 V with only a modest increase in quiescent current. Quiescent current is always less than 350 uA, with the charge pump enabled. The quiescent current of the UCC384 does not increase with load current. Short-circuit current is internally limited. The device responds to a sustained overcurrent condition by turning off after a tON delay. The device then stays off for a period, tOFF, that is 40 times the tON delay. The device then begins pulsing on and off at the tON/tOFF duty cycle of 2.5%. This drastically reduces the power dissipation during short circuit such that heat sinking, if at all required, must only accommodate normal operation. An external capacitor sets the on time. The off time is always 40 times tON. The UCCx84-x can be shutdown to 45 uA (maximum) by pulling the SD/CT pin more positive than –0.7 V. To allow for simpler interfacing, the SD/CT pin may be pulled up to 6 V above the ground pin without turning on clamping diodes. Internal power dissipation is further controlled with thermal-overload protection circuitry. Thermal shutdown occurs if the junction temperature exceeds 140°C. The chip remains off until the temperature has dropped 20°C (TJ = 120°C).
SPECIFICATIONS
Manufacturer: Texas Instruments
Part Number: UCC284DP-5 / UCC284DP-5G4
Product Category: LDO Voltage Regulators
Mounting Style: SMD/SMT
Package / Case: SOIC-8
Output Voltage: - 5 V
Output Current: 500 mA
Number of Outputs: 1 Output
Polarity: Negative
Quiescent Current: 250 uA
Input Voltage MAX: - 3.2 V
Input Voltage MIN: - 15 V
Output Type: Fixed
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Dropout Voltage: 250 mV
Series: UCC284-5
Height: 1.58 mm
Length: 4.9 mm
Width: 3.91 mm
Dropout Voltage - Max: 500 mV at 500 mA
Voltage Regulation Accuracy: 2.5 %
Ib - Input Bias Current: 200 uA
Line Regulation: 10 mV
Load Regulation: 0.25 %
Moisture Sensitive: Yes
Subcategory: PMIC - Power Management ICs
FEATURES
Precision Negative Series Pass Voltage Regulation
0.2 V Dropout at 0.5 A
Wide Input Voltage Range –3.2 V to –15 V
Low Quiescent Current Irrespective of Load
Simple Logic Shutdown Interfacing
2.5% Duty Cycle Short Circuit Protection
We are a
U.S. COMPANY
in business since 1995 and offer
FAST SHIPPING
, usually within 1 business day.
Our listings are for
GENUINE Items
, not cheap knock-off counterfeits.
Please view all photos for potential datasheets
and other information.
For full datasheet, please contact us.
Make sure to view the rest of our auctions for other
Electronic Components and Unique Electronic Devices
we have created.
Click on
Save This Seller
and get notified of Sales and New Product Listings.
If you want to purchase more quantity than listed or don't see the exact item you are searching for, please ask, we are here to help you.  We offer a discount on multiple item purchases and / or large quantities.