Digital Amplifier Board 5Wx2 6WX2 Volume Adjustable D Class Board Module PAM8406

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
Digital Amplifier Board 5Wx2 6WX2 Volume Adjustable D Class Board Module PAM8406
Popular
Popular
Product Introduction
Descriptions:
1. Volume: 23 * 24MM weight:0.45 g
2. Excellent noise suppression. in the absence of contact input audio, you will not hear any noise even put your ear close to the speaker
3. The two-channel stereo, 5V power supply can output 5W + 5W power, directly drive 4Ω, 8Ω speakers, output power, full of energy, good sound quality, with left and right channel volume adjustment.
4.unique non-LC filter Class-D digital power board, it can be used directly for the USB-powered from computers.
5. dual-panel wiring and proper solution to potential balance and channel crosstalk caused by the wiring between
6. ultra-miniature design, it can easily be placed in a small space inside a variety of digital products, high amplification efficiency.
7. Solder by machine
8. The rated working voltage 2.5-5V, limit operating voltage 5.5V
Package Included:
1 x  PAM8406 Digital Amplifier Board With Volume Potentiometer 5Wx2 Stereo M70
Description:
Size:42 x 40 x 15mm(volume potentiometer projection not included)
Voltage: DC3-5.5V (lithium battery is availuable)
Current:above 2.5A
Power:6W
Notes:
Power supply voltage can not exceed 5.5V.
Output is cmos tube BTL drive mode, the left and right speaker negative
can not be together, that is to say the four lines connected to the speaker
are completely independent, does not allow total access.
As long as these two cases appear,the IC will be burned at once.
Package Included:
1PC*PAM8406 Digital Class D Stereo Audio Amplifier Board 2 Channel 6W*2 AMP Board
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
Digital Amplifier Board 5Wx2 6WX2 Volume Adjustable D Class Board Module PAM8406
Product Introduction
Descriptions:
1. Volume: 23 * 24MM weight:0.45 g
2. Excellent noise suppression. in the absence of contact input audio, you will not hear any noise even put your ear close to the speaker
3. The two-channel stereo, 5V power supply can output 5W + 5W power, directly drive 4Ω, 8Ω speakers, output power, full of energy, good sound quality, with left and right channel volume adjustment.
4.unique non-LC filter Class-D digital power board, it can be used directly for the USB-powered from computers.
5. dual-panel wiring and proper solution to potential balance and channel crosstalk caused by the wiring between
6. ultra-miniature design, it can easily be placed in a small space inside a variety of digital products, high amplification efficiency.
7. Solder by machine
8. The rated working voltage 2.5-5V, limit operating voltage 5.5V
Package Included:
1 x  PAM8406 Digital Amplifier Board With Volume Potentiometer 5Wx2 Stereo M70
Description:
Size:42 x 40 x 15mm(volume potentiometer projection not included)
Voltage: DC3-5.5V (lithium battery is availuable)
Current:above 2.5A
Power:6W
Notes:
Power supply voltage can not exceed 5.5V.
Output is cmos tube BTL drive mode, the left and right speaker negative
can not be together, that is to say the four lines connected to the speaker
are completely independent, does not allow total access.
As long as these two cases appear,the IC will be burned at once.
Package Included:
1PC*PAM8406 Digital Class D Stereo Audio Amplifier Board 2 Channel 6W*2 AMP Board
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.